Welcome to the official website of CVR Pro-Audio Co., Ltd
W-25 & W-12/W-12P
W-25 is a line array system which is made of two 5" woofers, a 1.4" compression driver and high performance low distortion compression driver with innovative horn design of wave phase philosophy. Wherever low frequency extension is required, a W-25 will integrate seamlessly with W-12P line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-25 is very versatile and scalable for a wide range.
Description
W-25 is a line array system which is made of two 5" woofers, a 1.4" compression driver and high performance low distortion compression driver with innovative horn design of wave phase philosophy. Wherever low frequency extension is required, a W-25 will integrate seamlessly with W-12P line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-25 is very versatile and scalable for a wide range.
W-12P is a dedicated high performance sub-bass system designed to augment the low frequency output of W-25. The W-12P features a highly efficient power amp module and incorporate DSP. This efficient design enables the flown combination of W-12P and W-25.The physical dimensions of W-12P are identical to the W-25 and it's equipped with the same proprietary rigging system. It's features with two 10 inch woofer with magnet structure and suspensions engineered for maximum.
Parameter
|
TECHNICAL PARAMETERS |
|
|
Model |
W-25 |
|
Type |
Two-way line array system |
|
Frequency Response |
80Hz-20KHz±3dB |
|
Power capacity |
200W(RMS)800W(PEAK) |
|
Sensitivity |
91dB(1W/1M) |
|
110dB(PEAK/1M) |
|
|
Drivers |
LF 2×5"(135mm)woofer with 25mm (1in) coil |
|
HF 1×1.4"neodymium compression driver with 34mm titanium diaphragm |
|
|
Nominal impedance |
16 ohm |
|
Coverage |
110° H×9° V |
|
Connectors |
2×NL4MP speakon |
|
PHYSICAL PARAMETERS |
|
|
Dimensions |
410×163×248mm(W×H×D) |
|
Packing Dimensions |
610×25.5×47.5mm(W×H×D)/0.07cbm |
|
Enclosure Material |
HDPE |
|
Net weight |
6.5kg |
|
Gross weight |
14.5kg |
|
TECHNICAL PARAMETERS |
|
|
Model |
W-12P |
|
Type |
Line array subwoofer system |
|
Frequency Response |
50Hz-600Hz±3dB |
|
Power capacity |
700W(RMS)2800W(PEAK) |
|
Sensitivity |
97dB(1W/1M) |
|
Max SPL |
127dB(1W/1M) |
|
Drivers |
1×12"(310mm)woofer with 100mm (4in) coil |
|
Nominal impedance |
8 ohm |
|
Connectors |
2×NL4MP speakon |
|
PHYSICAL PARAMETERS |
|
|
Finish |
Textured paint |
|
Enclosure Material |
Plywood |
|
Dimensions |
408×392×494mm(W×H×D) |
|
Packing Dimensions |
490×480×575mm(W×H×D)/0.13CBM |
|
Net weight |
27.5kg |
|
Gross weight |
29.5kg |
|
POWER AMPLIFIER PARAMETERS |
|
|
Amplifier type |
Switching mode amplifier,class D circuit |
|
Power Output(RMS) |
2X900W/8ohm |
|
Other functions |
DSP Built-in |
|
Weight |
6.0kg |
|
Configuration |
The amp module is built inside W-12P,Which is designed to power 4/W-25+1/W-12P |
Drawing
Connection Diagram
Accessories
W-25&W-12P Support Frame
M20x35x600 Support Bar
Download File
Message
*Note: Please be sure to fill in the information accurately and keep the communication open, we will contact you as soon as possible
Didn't find the product you need? Please provide us with feedback
Continuously create greater value for customers
