DESCRIPTION and APPLICATION
W-312A is a line array system which is made of one 12” neodymium housed in bandpass box to deliver ultra powerful bass driver, two 6.5”neodymium midrange speaker units of well-designed of waves phase horn loading technique, two 3” titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-312A is a compact line array enclosure designed to bring superb line array performance to large stadiums, big outdoor concerts and commercial events. It meets the need for a high power, high bass impact system that is versatile and scalable for a very wide range of applications in the live sound, corporate and fixed installations. W-312A may be used without subwoofers in many applications.It may also be complemented by ground stacked subwoofers CVR S-218/CV-218B.
|
Model |
W-312A
|
|
Type |
Line array system |
|
Frequency Response |
45Hz-20KHz±3dB |
|
Power handling |
LF 600W(RMS)1200W(PEAK) |
|
MF 300W(RMS)600W(PEAK)
|
|
HF 200W(RMS)400W(PEAK) |
|
Sensitivity |
LF 104dB(1W@1M) |
|
MF 107dB(1W@1M) |
|
HF 111dB(1W@1M) |
|
Max@S.P.L |
LF 132dB(PEAK/1M) |
|
MF 132dB(PEAK/1M) |
|
HF 134dB(PEAK/1M) |
|
LF section |
1×12" (310mm)neodymium woofer |
|
75mm(3in)coil |
|
Nominal impedance |
8 ohm |
|
MF section |
2×6.5"(170mm)neodymium MF |
|
50mm(2in)coil |
|
Nominal impedance |
16 ohm |
|
HF section |
2×3"neodymium compression driver |
|
with 74mm titanium diaphragm |
|
Nominal impedance |
16 ohm |
|
Output section |
3-channel |
|
Dispersion pattern |
110°H×7°V |
|
Finish |
Water-proof,wear-resistant textured black paint |
|
Array design |
Arrays of less than 3×W-312A will |
|
provide poor dispersion control and |
|
are neither recommended nor supported |
|
Speaker cables |
LF 1(+)1(-) MF 2(+)2(-) HF 3(+)3(-) |
|
Rigging system |
Please refer to the W-312A user |
|
manual before any operation |
|
Input connectors |
2×Neutrik Nl8 |
|
Recommend crossover |
LF 60Hz-400Hz |
|
MF 400Hz-1.8kHz |
|
HF 1.8kHz-20KHz |
|
Dimensions |
1116×395×530mm(W×H×D) |
|
Package dimensions |
1190×470×600mm/0.34cbm |
|
Enclosure |
Birch plywood |
|
Net weight |
62kg |
|
Gross weight |
66kg |